Fibre Optic Sensors
Fibre optic sensors with rapid response, long range and analogue outputs.
In situations where access is restricted but performance cannot be compromised fibre optic sensors offer excellent performance. We are able to offer units with analogue outputs coupled to a wide range of fibre optic head designs. The fibre optic sensors are well suited to measuring and checking tasks, position detection of small parts, presence detection, positioning and assembly control, length and diameter control, precise and reliable detection of objectsFibre Optic Amplifier, CLS K series
The CLS K series of fibre optic amplifiers are compatible 
with a wide range of fibre optics and can have a sensing range of up to 200mm in a reflective application, or 2m when used in a through beam.
The 10-30 Vdc supply is reverse polarity and short circuit protected, the output options include NPN, PNP, Optocoupler, relay and analogue. The response time is as little as 120uS.
Fibre Optic Amplifier, CLS K 6 series
The CLS K 6 series of fibre optic amplifiers are compatible with a wide range of fibre optics and can have a sensing range of up to 200mm in a reflective application, or 2m when used in a through beam configuration.
The 10-30 Vdc supply is reverse polarity and short circuit protected, the output options include 0-20mA, 4-20mA & 0-10 Vdc. The response time is as little as 120uS.
Fibre Optic Amplifier, IFA - 10/0 series
The IFA fibre optic amplifiers are well suited to fast applications where an 8 kHz sampling rate is required. The response time is < 60µm. The analogue output is 0,5-5VDC and there is a PNP/NPN switching output as well. The range in reflex mode is up to 100mm and in trough beam it is up to 1000mm. The in built OFF delay timer can be set between 2 and 200mS, you can adjust the sensitivity and select from a wide range of fibre optic cables.
Fibre Optic Amplifier AFP234 - for multiple channels
This high resolution fibre optic amplifier can work with up to 4 channels. The simple teach in setup routine couple with the integrated logic AND/OR functions makes it ideal for applications where multiple sensing points are reuqired.
The resolution is up to 0.05mm, there is an optional analogue output and the measurements ae temperature compensated.
Fibre Optic Amplifier Series AFP 989 S - miniature
The AFP 989 S series of minitature light barriers have
either an NPN or PNP output and require a 10 - 30 Vdc supply voltage. You can adjust the sensitivity via a potentiometer, and there is a small red led indicator showing the output status.
IFA 10 UV - UV selective fibre optic amplifier
applications. With a range of 1 to 20mm (increases to 100mm in through beam mode) the unit has switched or analogue outputs.
Related Case Studies
Interested in Fibre Optic Sensors?
Contact us on +44 (0) 1827 310 666 or by using the form below to find out about prices and to place your order!
Contact Us
Fields marked with an asterix (*) are required.
