High pressure inductive proximity sensors

The required pressure-resistance (up to 500 bar, and over) High pressure proximity switchof Contrinex high-pressure-resistant proximity switches is obtained exclusively in the "direct way", i.e. by means of sufficient wall strength. At the sensing face, a ceramic disk of sufficient thickness to withstand pressure without further reinforcement measures inside the housing is used. Thus, no auxiliary constructions, such as for instance internal supports, are required. The entire electronic module, including the ferrite core and the coil, are placed in the pressure-free part of the housing. However, due to the thickness of the ceramic disk of 2.5 mm (P20), using a proximity switch module with a normal operating distance (in this case, 2 mm) would result in a usable operating distance of less than zero. These sensors overcome this problem.

 

Product information

 

 Technical article