Sensing and Telemetry News

17 Mar 2006

Digital Panel Meters

The Micra range of digital panel meters from Powelectrics are now even more competitive.

With a tri-colour display and standard DIN 96x48 housing the units are flexible and powerful.

Read More »

21 Feb 2006

ATEX Flow sensor

ATEX flow sensor amplifier SS 400 Ex serves to evaluate our range of flow sensors for areas where gas and dust explosions may occur according to ATEX. It is classified as category 2 equipment and can be installed and operated in zones 1 or 21. Therefore, the connected flow switch can be set on site to a desired limiting value with the help of the LED array. The relay output of the device can be operated either with type "intrinsic safety" or with type "increased safety" protection. This means that an ATEX approved device can be switched within zone 1 or 21.

Read More »

19 Feb 2006

Ultrasonic distance sensors

The new series of P43 ultrasonic distance sensors with small sized housings, narrow ultrasonic beam and short blind zone are opening applications where up to now photoelectric, capacitive or inductive sensors are used.

Read More »

31 Jan 2006

Inductive proximity sensors

Inductive proximity sensors for ambient temperatures up to 160 °C are available flush and nonflush in the standard M18 and M30 housings.

Read More »

08 Jan 2006

Laser distance sensor

As an addition to their range of laser triangulation sensors, Powelectrics have launched a new long-range laser distance sensor. The LDS 400 operates on the “time of flight” principal and can be used for measuring long distances in applications such as robot manufacturing cells, electronic suspension tracks and for controlling rolling processes in the paper, foil and metal industries.

Read More »

17 Nov 2005

Amplifiers that can be located in the hazardous area - flow sensors

The Ex-amplifier SS 400 Ex is designed for use with the thermal transfer flow sensors in areas where possible gas and dust explosions can occur in line with ATEX.

Read More »

17 Nov 2005

Compressed air flow monitoring

The new inline sensor series LDN is optimally suited to compressed air flow monitoring and blow-clear systems, or to monitor other non-explosive gas flows. The sensor can generally be used to control, monitor, or log airflows within a temperature range of -20°C to +80°C. The sensor is designed for compressed gases up to 20 bar and reacts quickly to flow changes across a broad range (between 0.5..40 m/s). It is installed in pipes using a standard G¼ threading.

Read More »

13 Oct 2005

Laser sensors

The LDS 100 series of laser sensors for measuring distance with meaurements ranges up to 4 metres have a resolution of up to 0.002mm.

Read More »

21 Sep 2005

Ultrasonic sensors

For use in machine building, materials handling, robotics, warehousing, print & paper and analytical applications the new P43 K series of ultrasonic sensors impress with their small housing, narrow ultrasonic beam angle, small blind zone and low cost.

Read More »