Colour monitor for testing LED's

Posted on 24 Jul 2009

An array resolution of 1024 x 768 is used.

The colour recognition system works with high dynamic range and will etect low-emitting LEDs up to high-emitting types in a range from 200 - 4000 lux intensity.


The colour spectrum RGB or HSI range there is a resolution for each better than Delta E of 1.

The integrated testing software can be adapted for specific user processes. As well as calibration and white balance, image parameters can be assigned to the relevant positions of the LEDs to be tested.

The detection evaluation rate is up to 100 measuring points in parallel at up to 32 tests per second. Two versions with 55 and 100 test points are available.

Options for 5, 10 or 20 test points with lower test conditions are available to the housing measures 95 x 87 x 230 mm and can be integrated into any testing system. All measured data is stored in the integrated Flash EEPROM. A PC with Windows XP is required for configuration of the testing software.

Enquire Now

If you're interested in Colour monitor for testing LED's or anything related to it we'd be pleased to hear from you. Either give us a call on 44(0) 1827 310 666 or fill out the short form below.